Accuquilt Go BIG Electric Fabric Cutter

To conserve fabric, cover the only shape you want to cut -- not the entire board. For asymmetrical shapes, place fabric pattern side up if you want the shape to look exactly like the shape on the die. Place fabric side down if you want the shape to be a mirror image of the shape on the die.

Our fastest cutter! Cuts two 6" wide dies, side by side, at a time
Accurately cuts up to 6 layers of fabric
Safe & easy to use
Compatible with all GO! dies
Electric - Fully automatic for ease of use
Our Biggest system - Cuts up to 14" wide dies
Built-in safety features
Folds for portability and easy storage
Go! Cutter Dies
Cutter Tote
Die Storage Rack
Die Care Pick
Cutting Mat
Limited One-Year Warranty
GO! Big Electric Fabric Cutter
GO! Flying Geese-3 1/2" x 6 1/2" (3" x 6" Finished) (55456)
GO! Cutting Mat-6" x 12" (55112)
Pattern & Idea Book
Product Registration Card
Quick Start Guide
User's Guide
Closed Dimensions: 19"W x 6"L x 11" H (48.3 cm x 15.2 cm x 27.9 cm)
Open Dimensions: 19"W x 18"L x 6" H (48.3 cm x 45.7 cm x 15.2 cm)
Item Weight: 23 lbs (10.4 kg)
Boxed Weight: 28 lbs. (12.7 kg)
  • For best results, always keep your GO! fabric cutter clean and lint free.
  • To clean the fabric cutter inside and out, use a soft dry cloth.
  • Avoid abrasives, solvents and spray cleaners.
  • If necessary, wipe with a damp cloth, then polish with a dry cloth.
  • Use canned air to clear lint from roller area.
  • The GO! Baby fabric cutter does not have replacement parts.
  • With some fabrics, after cutting, a thread or two will remain where die blades meet. Snip threads with scissors.
  • Use cutting mats that matches size of each die.
  • For best results, cut with die blades running under roller at an angle.
  • Do not cut with blades parallel to roller.
  • Blades on some dies are positioned at an angle. Align fabric to edge of shape, not edge of die board.
  • Some dies feature specially designed corners to aid in alignment and pre-cutting.
  • For fast applique, apply fusible web to fabrics, then cut shapes with dies.
  • Use good quality fabric to reduce fabric stretch.
  • It's always a good idea to test cut one shape before cutting many shapes to ensure fabric orientation is correct.